| Teil no | Hersteller | Application |
|---|
| MAX6307UK30D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds2.925(min),3.075(max).Nominal timeout period 20ms. |
| MAX379C/D | MAXIMIC | High-voltage, fault-protected analog multiplexer. |
| MAX6321HPUK47CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| DG407CJ | MAXIMIC | Improved, dual 8-channel CMOS analog multiplexer |
| MAX736EWE | MAXIMIC | -12V, inverting carrent-mode PWM regulator. |
| MAX314CSE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX1108EUB | MAXIMIC | Single-supply, low-power, 2-channel, serial 8-bit ADC |
| MAX6334UR17D1-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.7V, reset timeout(min) 1ms. |
| MAX6317HUK44DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1.12sec, typ watchdog timeout 6.3ms |
| MAX6348UR36-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.600V. Order increment 10k |
| MAX437CPA | MAXIMIC | Low noise, high-precision op amp. 60MHz gain-bandwidth product. |
| MAX320CPA | MAXIMIC | Precision, dual-supply, SPTS analog switch. |
| MAX309CSE | MAXIMIC | Precision, dual 4-channel, high-performance, CMOS analog multiplexer. |
| MAX6320PUK38BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6317HUK32CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX394EPP | MAXIMIC | Precision, quad, SPST analog switch |
| MAX525AEPP | MAXIMIC | Low-power, quad, 12-bit, voltage-output DAC with serial interface. INL(LSB) +-1/2. |
| MAX4429MJA | MAXIMIC | High-speed, 6A single MOSFET driver. 4.5V t0 18V supply range. |
| MAX6321HPUK35CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6306UK48D3-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.680(min),4.920(max) Nominal timeout period 140ms. |
| MAX4611ESD | MAXIMIC | Low-voltage, quad, SPST, CMOS analog switches (four NC switches). |
| MAX708REPA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.63V. Active-low and active-high reset output signal. |
| MAX6318LHUK35CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.500V min, reset timeout 140ms,typ watchdog timeout 25.6sec |
| MAX6316LUK36CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6316MUK45CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6320PUK46AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX9041BESA | MAXIMIC | Micropower, single-supply operation +2.5V to 5.5V, single comparator + precision reference IC. |
| MAX4613CSE | MAXIMIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
| MAX6318LHUK50CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6318MHUK38DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
