| Teil no | Hersteller | Application |
|---|
| DG444CY | MAXIMIC | Improved, quad, SPST analog switch |
| MAX4609CPE | MAXIMIC | Low on-resistance (2.5om max), dual, SPST, CMOS analog switches (one NO and one NC switche). |
| MAX6363HUT44-T | MAXIMIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 4.38V. Active-high push-pull reset. |
| MAX4578EPP | MAXIMIC | High-voltage, single 8-to-1 cal-multiplexer. |
| MAX6320PUK30AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX3186CAP | MAXIMIC | +-15kV ESD-protected, EMC-compliant, 230kbps RS-232 serial port for modems. |
| MAX973MJA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes. |
| MAX4075BMEUA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 79V/V, noninverting gain 80V/V, -3dB BW 50kHZ. |
| MAX455C/D | MAXIMIC | CMOS 50MHz video amplifier with an on-board multiplexer offering 8-channels |
| MAX6321HPUK30DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6321HPUK43BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6318MHUK32BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX187BC/D | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1. |
| MAX6321HPUK50AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX8860EUA18 | MAXIMIC | Low-dropout, 300mA linear regulator. Vout = +1.80V |
| MAX8214BMJE | MAXIMIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Active pull-up outputs. |
| MAX878CPA | MAXIMIC | Step-up/step-down DC-DC converters |
| MAX1470EUI | MAXIMIC | 315MHz low-power, +3V superheterodyne receiver |
| MAX4583CUE | MAXIMIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX160CPN | MAXIMIC | Microprocessor compatible 8-bit A/D converter. Fast conversion time 4microsec. Error +-1/2 LSB. |
| MAX4175BNEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 99, 1+ (Rf/Dg) noninverting gain 100, -3dB BW 230kHz. |
| MX7228BQ | MAXIMIC | CMOS octal 8-bit D/A converter. Error +-2 LSB |
| MAX542CCPD | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| MAX6321HPUK50AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| ICL8069BCSQ2 | MAXIMIC | Low-voltage reference, 25 ppm/C - max temp. coefficient. |
| MAX110BMJE | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| MAX246CPL | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX1204BCPP | MAXIMIC | +5V, 8-channel, serial, 10-bit ADC with 3V digital interface, INL (LSB) +1 |
| MAX6316LUK42CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 140ms, typ watchdog timeout 102ms |
| MAX6361HUT46-T | MAXIMIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 4.63V. Active-high push-pull reset. |
