| Teil no | Hersteller | Application |
|---|
| MAX4551ESE | MAXIMIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (four NC switches). |
| MAX195BC/D | MAXIMIC | 16-bit, 85ksps ADC with 10 microA shutdown |
| MAX4372TEUK-T | MAXIMIC | Low-cost, micropower, high-side current-sense amplifier with voltage output. +20V/V gain. |
| MAX6318LHUK28AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.800V min, reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX162CING | MAXIMIC | Complete high-speed CMOS 12-bit ADC. Error(LSB) +-1. |
| MAX6318MHUK40DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX539BCSA | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1. 140microA supply current. Flexible output ranges 0V to Vdd. |
| MAX6316LUK44BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX3241CUI | MAXIMIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| MAX1297BCEG | MAXIMIC | 265ksps, +3V, 2-channel single-ended/1-channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1, -1 |
| MAX4175BLEUK-T | MAXIMIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 60, 1+ (Rf/Dg) noninverting gain 61, -3dB BW 310kHz. |
| MAX167BMRG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX770C/D | MAXIMIC | 5V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX883EPA | MAXIMIC | 5V or adjustable, low-dropout, low current, 200mA linear regulator. 1microA(max) shutdown(OFF) mode. |
| MAX6348UR33-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.300V. Order increment 10k |
| MAX6310UK30D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.925(min),3.075(max). Nominal timeout period 1ms. |
| MAX4066CEE | MAXIMIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX6307UK33D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.218(min),3.383(max).Nominal timeout period 1120ms. |
| MAX6318LHUK25AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX692C/D | MAXIMIC | Microprocessor supervisory circuit. |
| MAX6316MUK44AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX208CAG | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX767EAP | MAXIMIC | 5V-to-3.3V, Synchronous, step-down power-supply controller. Ref. tol. +-1.8%, Vout 3.3V |
| ICL7614ACTV | MAXIMIC | Single operational amplifier, 2mV |
| MAX845C/D | MAXIMIC | Isolated transformer driver for PCMCIA applications. |
| MAX6306UK30D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 1ms. |
| MX7524TQ | MAXIMIC | CMOS 8-bit buffered multiplying DAC. TTL/CMOS compatible at +5V. Error +-1/4 LSB |
| MAX121CPE | MAXIMIC | 308ksps ADC with DSP interface and 78dB SINAD |
| MAX6321HPUK34BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6306UK41D4-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.998(min),4.203(max) Nominal timeout period 1120ms. |
