| Teil no | Hersteller | Application |
|---|
| MAX3223CPP | MAXIMIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MAX4223ESA | MAXIMIC | Single, 1GHz -3dB bandwidth, min gain +1, low-power, current-feetback amplifier with shutdown. |
| MAX762EPA | MAXIMIC | 15V or adjustable, high-efficiency, low Iq, step-up DC-DC converter. |
| MAX6320PUK43BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX382C/D | MAXIMIC | Low-voltage, 8-channel multiplexer with latchable inputs. |
| MX7224TD | MAXIMIC | CMOS 8-bit DAC with output amplifier. Error +-2 LSB. |
| MAX1294AEEI | MAXIMIC | 420ksps, +5V, 6-channel single-ended/3channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5, -0.5 |
| MAX4574CAI | MAXIMIC | Serially controlled, clickless audio/video switch. 3-wire, SPI/QSPI/MICROWIRE - compatible. |
| MAX6319MHUK39D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1120ms |
| MAX551BEUB | MAXIMIC | +5V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1. |
| MAX145BCUA | MAXIMIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-1 |
| MAX767C/D | MAXIMIC | 5V-to-3.3V, Synchronous, step-down power-supply controller. |
| MX7543GBQ | MAXIMIC | CMOS serial input 12 bit DAC. Error +1/2 LSB. |
| MAX3675EHJ | MAXIMIC | 622Mbps, low-power, 3.3V clock-recovery and data-remiting IC with limiting amplifier. 5mm TQFP. |
| MAX6316MUK43DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.300V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX6320PUK49CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX4274BEESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 24, 1+ (Rf/Dg) noninverting gain 25, -3dB BW 590kHz. |
| MX7528KEPP | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX6306UK32D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 1ms. |
| MAX3187EAX | MAXIMIC | +-15kV ESD-protected, EMC-compliant, 230kbps, dual RS-232 serial port for motherboards/desktops. |
| MAX6318LHUK44CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.390V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
| MXD1000UA50 | MAXIMIC | 5-tap silicon delay line |
| MAX6379XR42-T | MAXIMIC | Ultra-low-power voltage detector, 4.2V |
| MAX6317HUK41BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX793TCSE | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 3.00V to 3.15V. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Battery OK output.Watchdog input.Manual reset inp. |
| MAX3880ECB | MAXIMIC | +3.3V, 2.488Gbps, SDH/SONET 116 deserializer with clock recovery. |
| MAX6316MUK25CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6314US29D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 2.93V. Reset timeout period(min) 20ms. |
| MAX6318LHUK46CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 140ms,typ watchdog timeout 25.6sec |
| MAX6307UK36D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.510(min),3.690(max).Nominal timeout period 20ms. |
