| Teil no | Hersteller | Application |
|---|
| MAX6316MUK50AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX5018BIPG | MAXIMIC | 8-bit, high-speed DAC, 165Msps conversion rate. |
| MAX167CCNG | MAXIMIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX221EUE | MAXIMIC | +5V, 1microA, single RS-232 transceiver with AutoShutdown. |
| MAX6321HPUK37DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX323C/D | MAXIMIC | Precision, single-supply, SPST analog switch. |
| MAX1631CAI | MAXIMIC | Multi-output, low-noise power-supply controller for notebook computers. |
| MAX6337US25D3-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.5V, reset timeout(min) 100ms. |
| MAX6322HPUK29C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms |
| IH5049CWE | MAXIMIC | CMOS analog switch. |
| MAX795TCPA | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 3.00V to 3.15V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating. |
| MX581UH | MAXIMIC | High precision 10 volt reference. Error +-5mV. |
| DG212CSE | MAXIMIC | Quad SPST CMOS analog switch. |
| MAX6241BESA | MAXIMIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 7.0. |
| MAX202ESE | MAXIMIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX296MJA | MAXIMIC | 8th-order, lowpass, switched-capacitor filter. |
| MX7547CQ | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-1 LSB. |
| MAX144AEUA | MAXIMIC | +2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-0.5 |
| MX7548AQ | MAXIMIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1 LSB. |
| MAX6316MUK47BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX335ENG | MAXIMIC | Serial controlled, 8-channel SPST switch. |
| MAX189BEWE | MAXIMIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1. |
| MAX500AEWE | MAXIMIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-1. |
| MX7541BD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 1/2 LSB. |
| MAX7234BFIQ | MAXIMIC | Triplexed LCD decoder/driver (5 alphanumeric characters/18 segments; serial input format). |
| MAX666C/D | MAXIMIC | Dual Mode 5V or programmable micropower voltage positive with on-chip vow-battery detection circuitry regulator. |
| MAX4547ESE | MAXIMIC | Single,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MAX6316MUK45CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX321CPA | MAXIMIC | Precision, dual-supply, SPTS analog switch. |
| MX7521KD | MAXIMIC | CMOS 12 bit multiplying D/A converter. Error 0.1% |
