| Teil no | Hersteller | Application |
|---|
| MAX1247ACPE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX173CNG | MAXIMIC | Complete 5 microsec CMOS 10-bit A/D converter. |
| MAX4334ESD | MAXIMIC | Quad, low-power, single-supply, Rail-to-Rail I/O op amp. |
| MAX781EBX | MAXIMIC | PDA/hand-held computer power controller. |
| MX7528LN | MAXIMIC | CMOS dual 8 bit buffered multiplying DAC. +5V to 15V single supply operation. Error +-1/2 LSB. |
| MAX5354MJA | MAXIMIC | 10-bit voltage-output DAC. +5V single supply operation. |
| MAX4163ESA | MAXIMIC | Micropower, single-supply operation at 3V to 5V, Rail-to-Rail I/O op amp. 200kHz gain-bandwidth product. |
| MAX792REJE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V |
| MAX190BCWG | MAXIMIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1. |
| MAX6320PUK38BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX845ESA | MAXIMIC | Isolated transformer driver for PCMCIA applications. |
| MAX6317HUK44CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6321HPUK37CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX780BCNG | MAXIMIC | Dual-slot PCMCIA analog power controller. Register for direct connection to CPU data bus. Dual Vpp switches & level shifter for Vcc switching. |
| MAX4243EUB | MAXIMIC | Dual, ultra-low-voltage operation guaranteed down to +1.8V, typical operation to +1.5V, 10microA supply current, Beyond-the-Rail op amp with shutdown. |
| MX578TN | MAXIMIC | High speed 12-bit A/D converter. |
| MAX6334UR18D3-T | MAXIMIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 1.8V, reset timeout(min) 100ms. Standard version |
| MAX6312UK42D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.095(min) 4.305(max). Nominal timeout period 1120ms. |
| MXL1013CN8 | MAXIMIC | Dual precision op amp. |
| MAX178BEWG | MAXIMIC | Calibrated 12-bit ADC with T/H and reference. |
| DG307AK | MAXIMIC | CMOS dual and quad analog switch. |
| MAX709LCSA | MAXIMIC | Power-supply monitor with reset. Reset threshold voltage 4.65V |
| MAX6317HUK27CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MX574ATQ | MAXIMIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 3/4. TEMPCO(ppm/C) 25. |
| MAX311C/D | MAXIMIC | CMOS RF/video multiplexer (2-of-8, 4 channel differential). |
| MAX6314US31D1-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.08V. Reset timeout period(min) 1ms. |
| MAX6317HUK25DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| REF01AZ | MAXIMIC | +10V precisioon voltage reference. Max TEMPCO 8.5ppm/degC. Initial error +-15mV |
| MAX4501CPA | MAXIMIC | Low-voltage, SPST, CMOS analog switch. |
| DG303AK | MAXIMIC | Quad, TTL compatible CMOS analog switch. |
