| Teil no | Hersteller | Application |
|---|
| MAX6319MHUK48B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 20ms |
| DG413CUE | MAXIMIC | Improved, quad, SPST analog switches |
| MAX6316LUK42BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX487ECSA | MAXIMIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 128. |
| MAX149BEAP | MAXIMIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1. |
| MAX519BMJE | MAXIMIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1.5. |
| MX7548TQ | MAXIMIC | CMOS 8-bit microprocessor compatible 12-bit DAC. Linearity +-1/2 LSB. |
| MAX6316LUK42CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX320CSA | MAXIMIC | Precision, dual-supply, SPTS analog switch. |
| MXD1013PA100 | MAXIMIC | 3-in-1 silicon delay line. Output delay 100ns. |
| MAX530ACNG | MAXIMIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1/2. |
| MAX6321HPUK35DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX913EPA | MAXIMIC | Dual, ultra-fast(10ns), low-power, precision TTL comparator. |
| MAX6361LUT26-T | MAXIMIC | Low-power microprocessor supervisory circuit with manual reset input. Reset threshold(typ) 2.63V. Active-low push-pull reset. |
| MAX7231BFIPL | MAXIMIC | Triplexed LCD decoder/driver (8 digits/7 segments; parallel input format; 2 annunciators per digit) |
| DG508ADJ | MAXIMIC | Monolithic CMOS analog multiplexer. Single 8-channel (1-of-8). |
| MAX6320PUK46DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MXD1013UA150 | MAXIMIC | 3-in-1 silicon delay line. Output delay 150ns. |
| IH5041CJE | MAXIMIC | General-purpose CMOS analog switch. Dual, single pole, single throw (Dual SPST) |
| MAX1112CCP | MAXIMIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
| MAX6318LHUK41AY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.100V min, reset timeout 1ms,typ watchdog timeout 1.6sec |
| MAX6312UK42D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.095(min) 4.305(max). Nominal timeout period 20ms. |
| DG381BA | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX275BEWP | MAXIMIC | 4th-order continuous-time active filter |
| MAX154ACAG | MAXIMIC | CMOS high-speed 8-bit ADC with multiplexer and reference. Error (LSB) +,-1/2 |
| MAX6318MHUK44AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6316LUK28AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX1246BCEE | MAXIMIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1,-1 |
| MAX6318LHUK46AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.630V min, reset timeout 1ms,typ watchdog timeout 6.3ms |
| MAX6318MHUK49CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
