| Teil no | Hersteller | Application |
|---|
| ICM7211AIQ | MAXIMIC | Four digit display decoder/driver. LCD, output code - code B, input configuration - multiplexed 4-bit. |
| MAX6321HPUK41CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX7407CPA | MAXIMIC | 8-th-order, lowpass, elliptic, switched-capacitor filter. Filter response elliptic (r=1.2), operating voltage +3V |
| MAX641AESA | MAXIMIC | +5V fixed output, 10W CMOS step-up switching regulator. 5% output accuracy |
| MAX735ESA | MAXIMIC | Negative output, inverting, current-mode PWM regulator. Converts +4V to +6.2V input to -5V output. |
| MAX6318MHUK34DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX297C/D | MAXIMIC | 8th-order, lowpass, elliptic, switched-capacitor filter. Clock-tunable corner-freguency range 0.1Hz to 50kHz |
| MAX327CPE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MX7542SD | MAXIMIC | CMOS microprocessor-compatible 12 bit DAC. Error +1 LSB. |
| MX536AJCWE | MAXIMIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX1697REUT-T | MAXIMIC | 60 mA, inverting charge pump with shutdown, 12 kHz. |
| MAX4591EPE | MAXIMIC | High-speed, single-supply 12V, quad, SPST analog switches (four NC switches). |
| MAX352ESE | MAXIMIC | Precision, quad, SPST analog switch |
| MAX4538ESE | MAXIMIC | Quad, low-voltage, SPST analog switches with enable. 2 NO and 2 NC. |
| MAX4583CSE | MAXIMIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX410ESA | MAXIMIC | Single, 28MHz, low-noise, low-voltage, precision op amp. |
| DG309CJ | MAXIMIC | Quad, SPST, NC analog switch |
| MAX6318MHUK31AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6316LUK28AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.800V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX531ACSD | MAXIMIC | +5V, low-power, voltage-output, serial 12-bit DAC. Error (LSB) +-1/2. Internal 2.048V reference. Flexible output ranges 0V to Vdd, Vss to Vdd, 0V to 2.6V. |
| MAX4572CAI | MAXIMIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX6318MHUK42DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6337US23D2-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.3V, reset timeout(min) 20ms. |
| ICM7555ISA | MAXIMIC | Single general purpose RC timer |
| MAX8863REUK-T | MAXIMIC | Low-dropout, 120mA linear regulator. Preset output voltage 2.80V |
| MAX465C/D | MAXIMIC | Two-channel, triple RGB switch and buffer. Voltage gain 2V/V. |
| MAX6321HPUK43DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6314US45D2-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.50V. Reset timeout period(min) 20ms. |
| MAX4228EUB | MAXIMIC | Quad, 600MHz -3dB bandwidth, min gain +2, low-power, current-feetback amplifier with shutdown. |
| MAX730ACPA | MAXIMIC | 5V, step-down, current-mode PWM DC-DC converter accept input between 5.5V and 11V and deliver 450mA for inputs above 6V. |
