| Teil no | Hersteller | Application |
|---|
| MXL1074ET | MAXIMIC | 5A step-down, PWM, switch-mode DC-DC regulator. Adjustable output 2.5V to 35V |
| MAX4558ESE | MAXIMIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX6327XR25-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.500V. Order increment 10k |
| MAX6380XR43-T | MAXIMIC | Ultra-low-power voltage detector, 4.3V |
| MAX1295BEEI | MAXIMIC | 265ksps, +3V, 6-channel single-ended/3-channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1, -1 |
| MAX327EJE | MAXIMIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| DG309AK | MAXIMIC | Quad, SPST, NC analog switch |
| MAX4558EPE | MAXIMIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX820TCSE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 3.06V. Reset and low-line threshold accuracy +-2% |
| MAX6309UK47D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 20ms. |
| MAX702CSA | MAXIMIC | Power-supply monitor with reset. |
| MAX6318MHUK26BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX6309UK32D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.120(min),3.280(max) Nominal timeout period 140ms. |
| MAX2266EUE | MAXIMIC | 2.7V, single-supply, cellular-band linear power amplifier. Low average CDMA current consumption in typical urban scenario 40mA. TSSOP-EP 5mm x 6.4mm. |
| DG300BA | MAXIMIC | Dual, TTL compatible CMOS analog switche |
| MXD1013PD012 | MAXIMIC | 3-in-1 silicon delay line. Output delay 12ns. |
| MAX2452ISE | MAXIMIC | 3V, ultra-low-power quadrature modulator. |
| MAX824TEUK | MAXIMIC | Microprocessor supervisory circuit. Reset threshold 3.08V. Active-low reset. Active-high reset. Watchdog input. |
| MAX4535EPD | MAXIMIC | Fault-protected, high-voltage, dual 2-to-1 multiplexer operated with +-4.5V to +-20V dual supply or a +9V to +39V single supply. |
| MAX6320PUK4BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6317HUK48CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6327XR22-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.200V. Standard version. Order increment 2.5k |
| MAX6316MUK36CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.600V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6375UR28-T | MAXIMIC | Ultra-low-power voltage detector, 2.8V |
| MAX709MCSA | MAXIMIC | Power-supply monitor with reset. Reset threshold voltage 4.40V |
| IH5144C/D | MAXIMIC | Low power fast CMOS analog switch. Double pole, single throw (DPST). |
| ICM7555MTV | MAXIMIC | Single general purpose RC timer |
| MAX6320PUK32CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX6318MHUK35CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6322HPUK27C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 140ms |
