| Teil no | Hersteller | Application |
|---|
| MAX4607EPE | MAXIMIC | Low on-resistance (2.5om max), dual, SPST, CMOS analog switches (two NC switches). |
| IH5050CWE | MAXIMIC | CMOS analog switch. |
| MAX6322HPUK48D-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 1120ms |
| MAX467C/D | MAXIMIC | Two-channel, triple video buffer. Voltage gain 1V/V. |
| MAX3297CUE | MAXIMIC | 3.0V to 5.5V, 2.5Gbps LAN laser driver. |
| MAX532AEPE | MAXIMIC | Dual, serial-input, voltage-output, 12-bit MDAC. Error (LSB) +-1/2 |
| MAX6316LUK45DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX392EJE | MAXIMIC | Precision, quad, SPST analog switch |
| SI7661ESA | MAXIMIC | CMOS voltage converter |
| MAX6375UR31-T | MAXIMIC | Ultra-low-power voltage detector, 3.1V |
| MAX6318MHUK40CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6312UK30D4-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.925(min) 3.075(max). Nominal timeout period 1120ms. |
| DG418DJ | MAXIMIC | Improved, SPST, NO analog switch |
| MAX6319LHUK36B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms |
| MAX6321HPUK41BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX637BC/D | MAXIMIC | Preset -15V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX317CPA | MAXIMIC | Precision, CMOS analog switch |
| MAX6502UKP105-T | MAXIMIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) +105. |
| MAX232AC/D | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX5122BEEE | MAXIMIC | +5V, 12-bit, serial, force/sense DAC with 10ppm/C internal reference +2.5V. INL (LSB) +-1. |
| MAX806SCSA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| IH5144M/D | MAXIMIC | Low power fast CMOS analog switch. Double pole, single throw (DPST). |
| MAX310EWN | MAXIMIC | CMOS RF/video multiplexer (1-of-8). |
| MX7537KEWG | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-3 LSB. |
| MAX6380XR45-T | MAXIMIC | Ultra-low-power voltage detector, 4.5V |
| MAX385CSE | MAXIMIC | Precision, low-voltage analog switch. |
| DG405CY | MAXIMIC | Improved, dual, DPST, NO, high-speed analog switch. |
| MAX4509MJE | MAXIMIC | Fault-protected, high-voltage dual 4-to-1 multiplexer. |
| DG381C/D | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX3245ECWI | MAXIMIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
