| Teil no | Hersteller | Application |
|---|
| MAX542CESD | MAXIMIC | +5V,serial-input, voltage-output, 16-bit DAC. INL (LSB) +-4 |
| MAX6328UR24-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.400V. Order increment 10k |
| MAX6318MHUK43BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX140CPL | MAXIMIC | 3 1/2 digit A/D converter with bandgap reference and charge-pump voltage converter |
| MAX4508CPE | MAXIMIC | Fault-protected, high-voltage single 8-to-1 multiplexer. |
| MAX6307UK39D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.803(min),3.998(max).Nominal timeout period 1ms. |
| MAX5123AEEE | MAXIMIC | +3V, 12-bit, serial, force/sense DAC with 10ppm/C internal reference +1.25V. INL (LSB) +-1. |
| MAX6320PUK26BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX242EPN | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX4066AEEE | MAXIMIC | Low-cost, low-voltage, quad, SPTS, CMOS analog switch. |
| MAX3491EPD | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 10Mbps. Supply voltage 3.0V to 3.6V |
| MAX649EPA | MAXIMIC | 5V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX895LESA | MAXIMIC | Dual, current-limited 250mA, high-side P-channel switch with thermal shutdown. |
| MAX266BMJI | MAXIMIC | Pin and resistor programmed universal active filter. Accyracy 2% |
| MAX166ACWP | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1/2 LSB. |
| MAX313EUE | MAXIMIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6320PUK37BZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX4537ESE | MAXIMIC | Quad, low-voltage, SPST analog switches with enable. 4 NC. |
| MAX6312UK28D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 2.730(min) 2.870(max). Nominal timeout period 20ms. |
| MAX6321HPUK42AW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX690SCPA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.925V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6316LUK46DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MX636JH | MAXIMIC | 100mV. Auxiliary dB output 50dB range. Low power 0.8mA(typ). |
| MAX4310EUA | MAXIMIC | = +1V/V |
| MAX630EJA | MAXIMIC | CMOS micropower step-up switching regulator |
| MAX802LCSA | MAXIMIC | Microprocessor supervisory circuit. 4.65V precision supply-voltage monitor. Power-fail accuracy guaranteed to +-2%. |
| MAX150AEPP | MAXIMIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1/2 LSB |
| OP27EJ | MAXIMIC | Low-noise precision operational amplifier. 8MHz gain-bandwidth product. 2.8V/micros slew rate |
| MAX6318MHUK40DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX469EPE | MAXIMIC | Two-channel, triple video buffer. Voltage gain 2V/V. |
