| Teil no | Hersteller | Application |
|---|
| MAX466EWI | MAXIMIC | Two-channel, quad RGB switch and buffer. Voltage gain 2V/V. |
| MAX758AMJA | MAXIMIC | Adjuistable, step-down, current-mode PWM regulator. Inputs from 4V to 16V, up to 750mA load currents. |
| MAX901BCPE | MAXIMIC | High-speed, low-power voltage comparator |
| MAX6318LHUK27BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.700V min, reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX6320PUK35CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX6321HPUK45BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX4509CSE | MAXIMIC | Fault-protected, high-voltage dual 4-to-1 multiplexer. |
| MAX6321HPUK33DX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX190ACNG | MAXIMIC | Low-power, 12-bit sampling ADC with internal reference and power-down. Error(LSB) +-1/2. |
| MAX803ZEXR-T | MAXIMIC | Microprocessor reset circuit Reset threshold 2.32V. Open-drain active-low reset. 2.5k increments. |
| MAX820REPE | MAXIMIC | Microprocessor and non-volatile metory supervisory circuit. Reset threshold 2.61V. Reset and low-line threshold accuracy +-2% |
| MAX6321HPUK35CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6321HPUK31BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6342RUT-T | MAXIMIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 2.63V. Push-pull active-low reset output, manual-reset input. |
| MAX3325ENI | MAXIMIC | 3V dual RS-232 transceiver with LCD supply and contrast controller. |
| MAX692AEPA | MAXIMIC | Microprocessor supervisory circuit. 4.40V precision supply-voltage monitor |
| MAX418CSD | MAXIMIC | 1.2microA max, quad, single-supply op amp. |
| DG417AK | MAXIMIC | Improved, SPST, NC analog switch |
| MAX154BC/D | MAXIMIC | CMOS high-speed 8-bit ADC with multiplexer and reference. Error (LSB) +,-1/2 |
| MAX4621EPE | MAXIMIC | Low on-resistance 3om(typ), 5om(max), dual, SPST, NO analog switch. |
| MAX6310UK34D2-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.315(min),3.485(max). Nominal timeout period 20ms. |
| MAX6316MUK37DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX6320PUK49CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX3480BCPI | MAXIMIC | Complete, isolated, 3.3V RS-485/RS-422 data interface. Data rate 250 kbps. |
| MAX519AEPE | MAXIMIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1. |
| MAX6316MUK44DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX856ESA | MAXIMIC | 3.3V or 5V output, step-up DC-DC converter. |
| MAX197BENI | MAXIMIC | Multi-range (+10V, +5V, +10V, +5V), single +5V, 12-bit DAS with 8+4 bus interface |
| MAX4102ESA | MAXIMIC | 250MHz -3dB bandwidth, broadcast-quality, low-power video op amp. |
| MAX6712LEXS-T10 | MAXIMIC | Microprocessor reset circuit with manual reset input. Reset threshold 4.63V. Output type active-high push-pull reset. |
