| Teil no | Hersteller | Application |
|---|
| MAX8860EUA27 | MAXIMIC | Low-dropout, 300mA linear regulator. Vout = +2.77V |
| MAX7411EPA | MAXIMIC | 5th-order, lowpass, elliptic, switched-capacitor filter. Transition ratio r = 1.25, operating voltage +5V |
| MAX6318MHUK41AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX192ACWP | MAXIMIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1/2. |
| MAX973CPA | MAXIMIC | Ultra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes. |
| MAX6250ACPA | MAXIMIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 2.0. |
| MX636JC/D | MAXIMIC | 100mV. Auxiliary dB output 50dB range. Low power 0.8mA(typ). |
| MAX6318LHUK28CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.800V min, reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX619C/D | MAXIMIC | Regulated 5V charge-pump DC-DC converter. |
| MAX6322HPUK37C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms |
| MAX6310UK25D1-T | MAXIMIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 2.438(min),2.563(max). Nominal timeout period 1ms. |
| MAX3488ESA | MAXIMIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 0,25Mbps. Supply voltage 3.0V to 3.6V |
| MAX6321HPUK27CX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6319LHUK50B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 20ms |
| MAX5152ACPE | MAXIMIC | Low-power, dual, 13-bit voltage-output DAC with configurable output amplifier. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX7645BEJP | MAXIMIC | TTL/CMOS compatible for Vdd = 15V, 12-bit buffered multiplying DAC. Gain error +-3 LSB. |
| MAX3085EPA | MAXIMIC | Fail-safe, high-speed (10Mbps), slew-rate-limited RS-485/RS-422 transceiver |
| MAX6320PUK32DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX4274ABESA | MAXIMIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 0.25, 1+ (Rf/Dg) noninverting gain 1.25, -3dB BW 1700kHz. |
| MAX6318LHUK36DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.600V min, reset timeout 1.12sec,typ watchdog timeout 25.6sec |
| MAX6316LUK25DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 1120ms, typ watchdog timeout 6.3ms |
| MAX131AEQH | MAXIMIC | 3 1/2 Digit A/D converter with bandgap reference |
| MAX4546EEE | MAXIMIC | Dual,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MX7547JEWG | MAXIMIC | CMOS parallel loading dual 12 bit multiplying D/A converter. Gain error +-6 LSB. |
| MAX165BEWN | MAXIMIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1 LSB. Plug-in upgrade to the MX7575. |
| MAX536BMDE | MAXIMIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-1LSB total unadijusted error. INL (LSB) +-1 |
| MAX6317HUK37AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX660CSA | MAXIMIC | CMOS monolithic voltage converter |
| MAX633BESA | MAXIMIC | CMOS fixed +15V output voltage, adjustable output with 2 resistors step-up switching regulator. 10% output accuracy. |
| MAX6309UK29D3-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 2.857(min),3.000(max) Nominal timeout period 140ms. |
