| Teil no | Hersteller | Application |
|---|
| MAX805RCSA | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 2.625V. Active-high reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-4%. Power-fail comparator. Reset window +-75mV |
| MAX6346UR46-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 4.630V. Standard version. Order increment 2.5k |
| MAX4075CAESA | MAXIMIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 100V/V, noninverting gain 101V/V, -3dB BW 38kHz. |
| MX7224UD | MAXIMIC | CMOS 8-bit DAC with output amplifier. Error +-1 LSB. |
| MAX6348XR42-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 4.200V. Order increment 10k |
| MAX4190ESD | MAXIMIC | =2V/V. |
| MAX6317HUK30CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6318LHUK25DY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX4545CAP | MAXIMIC | Quad,low-voltage T-switch designed for switching RF and video signals from DC to 300MHz in 50om and 75om systems. |
| MX7545TD | MAXIMIC | CMOS 12-bit buffered multiplying DAC. Error +-1 LSB. |
| MAX6327XR28-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 2.800V. Order increment 10k |
| MAX6328UR22-T | MAXIMIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.200V. Standard version. Order increment 2.5k |
| MAX731EWE | MAXIMIC | 5V step-up current-mode DC-DC converter |
| MAX6317HUK44CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX6317HUK50DZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MAX708TCSA | MAXIMIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 3.08V. Active-low and active-high reset output signal. |
| MAX469C/D | MAXIMIC | Two-channel, triple video buffer. Voltage gain 2V/V. |
| MAX6322HPUK25B-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 20ms |
| MAX1626C/D | MAXIMIC | 5V/3.3V, 100% duty-cycle, high-efficiency, step-down DC-DC controller |
| MAX244EQH | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MXL1001MJ8 | MAXIMIC | Precision operational amplifier |
| MAX6304ESA | MAXIMIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, push/pull reset output. |
| MAX6317HUK35BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX170DC/D | MAXIMIC | Serial output 5.6 microsec 12-bit A/D converter. Error +-1 LSB. |
| MAX1291ACEI | MAXIMIC | 250ksps, +3V, 8-channel single-ended/4channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +0.5,-0.5 |
| MAX651CPA | MAXIMIC | 3.3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MAX4553ESE | MAXIMIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (two NO and two NC switches). |
| MAX6316MUK42BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 20ms, typ watchdog timeout 102ms |
| MAX6318MHUK34AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX6314US36D3-T | MAXIMIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.60V. Reset timeout period(min) 140ms. |
